Шредеры

SW-250/110125

SW-200/2-110

ST-150/110125

SW-150/2-110

ST-125/2-110

ST-100/2-110

ST-60/180100/D

SW-50/15076/D

ST-40/12080/D

SW-30/11070/D

ST-80/12080

ST-50/11070

ST-40/10060

ST-30/8060

SW-50/15075

SW-40/11075

SW-30/11070

ST-50/12080

SW-30/12080

SW-10/10070

SW-5/8060

SW-100/2-110

ST-100/11080

SW-80/11085

SW-80/11080

ST-60/11075

SW-60/11075

SW-60/7585

ST-40/7280

SW-30/5050

ST-20/5050

ST-20/8060

ST-10/6040

SW-8/7050

ST-5/6040

SW-2/5947

SW-150/110120/SGU

SW-120/110120/SGU

SW-100/2-110/SGU

SW-80/11080/SGU

SW-60/7585/SGU

SW-40/7272/SGU

SW-120/110120/SG

ST-100/11085/SG

SW-80/11080/SG

ST-60/10080/SG

SW-40/7272/SG

ST-30/7070/SG

SW-150/110120/S

SW-120/110120/S

SW-100/110110/S

SW-80/11080/S

SW-60/7585/S

ST-40/7280/S

Vertical presses

The vertical press is designed for pressing secondary raw materials and then packing them into a dense bale (bale). Due to its compactness, the press can be installed in small rooms. The type of press is hydraulic. The press is equipped with a press plate located inside the press chamber, which moves in a vertical plane and compresses the material loaded into the press chamber. Eventually, a dense pile is formed from the bulk secondary raw materials. The main idea of using pressing equipment is to reduce the volume of pressed material in order to reduce the cost of transporting it to the processing site.

BIO compactors

Smart press C-Bio mobile compactors are designed for the treatment of waste with a high moisture content, such as wet mixed waste and food waste. The compactors are completely sealed to ensure hygiene at the location. They are equipped with a low-lying loading window, which makes it easier to load waste. The Smart press CBio biocompactor uses the technology of a self-cleaning pendulum press plate. The pendulum press plate works like a wiper: any material that does not fall into the range of the press plate is removed in the reverse direction of the press plate. Due to this design, there is no need to regularly clean the cavities behind the press plate.

Mobile compactors

Smartpress C-Max compactors are universal waste compactors designed for active operation. They are easy to use and designed to meet various waste management requirements. Compactors are a highly efficient alternative to waste containers, having a compression ratio of up to 10:1.

Stationary compactors

The reliable stationary compactors for Smartpress D-Max waste are designed for intensive operation. It is an ideal solution for processing a large number of different dry materials. The large loading window of the compactor ensures easy loading of waste. Since D-Max are stationary compactors, their containers are disconnected for transportation, and the pressing unit remains securely attached to the concrete platform. Compactors can be equipped with receiving hoppers for various waste loading options: through a wall, from ground level, ramp or from the level of 2-3 floors. The design of the compactor also allows the installation of various loading devices, such as conveyors. The D-Max series compactors can be supplied with a number of additional options, for example, with a dumpster tipper and a lid opening system. Containers of several standard volumes up to 32 m2 can be used with compactors to handle extremely heavy loads. Compactors can operate 24/7, especially if there is a second spare container.

Horizontal presses

They allow you to press secondary raw materials in automatic mode, i.e. the press turns on when the secondary raw materials enter the loading window, then, as the material arrives, the press forms a dense pile and ties it with wire. The operator provides the supply of secondary raw materials and the reception of finished bales

Semi-automatic horizontal presses

This group of presses is also suitable for pressing large volumes of secondary raw materials, but differs only in that the fact of forming a dense pile requires the operator to participate in the process of strapping it. This group of presses is also suitable for pressing large volumes of secondary raw materials, but differs only in that the fact of forming a dense pile requires the operator to participate in the process of strapping it. They allow you to press secondary raw materials in automatic mode, i.e. the press is switched on at the moment of receipt of secondary raw materials into the loading window, then, as the material arrives, the press forms a dense pile and ties it with wire. The operator provides the supply of secondary raw materials and the reception of finished bales

Training of service personnel to work with new brands

In the world of cargo processing and waste management, new brands of equipment appear every day, and companies seeking help in this area face the challenge of teaching their service personnel how to work with new equipment. The company’s service system is a key factor in business success. That is why training programs are specially […]

Installation of a buried conveyor

Installation of a buried conveyor for the Presona automatic horizontal press at our partner’s facility in St. Petersburg

Installation of the automatic horizontal press SMART Press SW-60/11075

Installation of the automatic horizontal press SMART Press SW-60/11075 at the factory producing corrugated cardboard and packaging in St. Petersburg

Installation of an automatic horizontal press

SMART Press ST-80/11075 at the distribution center of the retail chain in Yekaterinburg